[ Back ] [ Next ] [ Documentation Index ]   Product Home Page  Home Page

Enable Use of Video Multiplexer

Assumes you have installed the video multiplexer from FG Engineering, have enabled the mux driver, attached several cameras to the mux ports, and now want to be able to physically switch between camera inputs e.g. attached cameras 0,1, and 2 to the mux ports. 

Select menu item, Settings, Multiple Camera Scanning, Scan Settings, place a check mark beside, Enable use of FGE Video Multiplexer which is Already Installed. Click OK. Save Configuration.

Select menu item, Settings, Multiple Camera Scanning, Switch Camera Input Now, enter 0, click OK.

Select menu item, Settings, Multiple Camera Scanning, Switch Camera Input Now, enter 1, click OK.

Select menu item, Settings, Multiple Camera Scanning, Switch Camera Input Now, enter 2, click OK.

Result:

Each different camera  input is displayed in left part of Video Monitoring Software window. Confirms mux is installed and working OK.

One could now Enable Cameras, and Enable Scanning with all the new cameras attached.

Note:

How to install and test the installed video multiplexer is documented in the video multiplexer package.

Video Surveillance WebCam Software by FG Engineering
Edition: Video Site Monitor
Product Documentation Version 4.3
Copyright (c) 2001+ FG Engineering Inc.
www.fgeng.com